Summary
64 product(s) found for "QUEEN REARING"
Queen Cage - Green
While the queen is on the comb, you should lower the cage over the queen. The worker bees will escape from the spikes but the queen will remain. Using a queen marking pen or numbering kit - you should put a dot on the back of her thorax . .
1,00 €
Premium Queen Cage
Plastic queen cage with clear cover
1,50 €
Queen Cage - Californian
California Mini Queen Cages were produced after considerable thought and careful craftsmanship by leading queen producers and has brought the cage to queen breeders big and small. Its size makes this queen cage easy to insert between the frames without damaging the comb or disturbing the hive. The fine...
2,50 €
Wing Clipper Scissors
Spring loaded wing clipping scissors for queen clipping. Gold handled & specially commissioned for Irish Bee Supplies. Easily used even while wearing gloves.
8,00 €
Marking Pen
Water based, non toxic, non fade and quick drying. Very easy to apply. Will not dry out. Built in agitator mixes paint prior to use. In all five international colours. Green = 2019 Blue = 2020 White - 2021 Yellow = 2022 Red = 2023
5,00 €
Queen Cage
Plastic queen cage
1,00 €
Queen Catcher - Plastic Clip
Plastic Queen clip catcher
3,00 €
Queen Cage - White
While the queen is on the comb, you should lower the cage over the queen. The worker bees will escape from the spikes but the queen will remain. Using a queen marking pen or numbering kit - you should put a dot on the back of her thorax . .
2,00 €
Top Feeder - Multi Nuc
Multi-Breeding Nuc top feeder
11,51 €
One Handed Queen Catcher
One hand plastic queen bee catcher and marking cage combination. Use for catching and holding queen bees while you mark them. You simply open the grid door, make sure the plunger is away from the door, place the unit over the queen, and slowly close the door to trap the queen. Then gently push the sponged...
13,00 €
Queen Cage - Steel
While the queen is on the comb, you should lower the cage over the queen. The worker bees will escape from the spikes but the queen will remain. Using a queen marking pen or numbering kit - you should put a dot on the back of her thorax. Marker available HERE .
3,51 €
Apidea Crownboard
Perspex crownboard to suit Apidea mating hive
6,00 €
Tweezers
Tweezers for checking larvae. .
1,00 €
Apidea Frames - Orange
APIDEA FRAMES ORANGE - supplied in packs of five. The Apidea mating hives themselves are well designed, robust and thought through pieces of equipment. Queens that emerge in them appear to get mated quickly and they use only a small amount of apiary resources. Basically, a cup full of bees, a piece of...
10,00 €
Grafting Tool - Plastic
Grafting tool used to graft larvae to queen section of hive. Spring loaded plunger for sliding larvae off the spatula tip. 110mm long. Grafting is delicate work that requires patience, a steady hand and excellent vision. To graft, lower the grafting tool behind the curve of the larva, maneuver the tool...
2,00 €
Queen Cage - Standard
Versatile queen cages - used for queen introduction, rearing & transportation. Easy to use with "snap off" tags, a candy chamber and sliding top plate. .
1,00 €
Royal Jelly Pen
Royal jelly pen used for transferring royal jelly from the cup. Soft silicone head. Royal jelly is harvested by stimulating colonies with movable frame hives to produce queen bees. Royal jelly is collected from each individual queen cell when the queen larvae are about four days old. These are the only...
1,00 €
Apidea Vent & Excluder
Vents & queen excluder for Apidea mating hive. The Apidea mating hives themselves are well designed, robust and thought through pieces of equipment . Queens that emerge in them appear to get mated quickly and they use only a small amount of apiary resources. Basically, a cup full of bees, a piece of...
5,00 €
BAMBOO GRAFTING TOOL
Grafting tool used to graft larvae to queen section of hive. Spring loaded plunger for sliding larvae off the spatula tip. 110mm long. Grafting is delicate work that requires patience, a steady hand and excellent vision. To graft, lower the grafting tool behind the curve of the larva, maneuver the tool...
5,00 €
Cell Strip
Contains 30 cells. Approx. 380mm in length
0,50 €
Queen Introduction Cage
There is no 100% safe way to introduce a new queen into a colony but this queen introduction cage will give your queen a better chance especially if you are re-queening due to the nature of your bees! It is quite acceptable to use the cage your queen comes in as the introduction cage but if you have...
4,00 €
ISOLATOR CAGE FRAME
Isolators are used for separating the queen-bee and contol queen brooding. The isolator is made from queen-excluder (of 4,3mm wire spacing). The distance between excluder s wires allows worker bees to pass through but not the larger queens and drones. Queen-bee is restricted inside the isolator. Isolator...
35,00 €
Queen Clip Catcher - Stainless Steel
High quality stainless steel queen clip catcher.
5,00 €
Queen Marking Tube
Plunger type queen marking cage. Once you've captured the queen, you drop her into the plastic tube and insert the sponge-covered plunger part way. Then you hold the tube so the mesh end is up and the stick end is down the way you would hold a popsicle .
4,00 €
Queen Catcher - Pipe
Remove the sponge from the large end of the pipe with a large opening. Place the opening of the pipe over the queen and wait for her to crawl inside. Once she is inside the pipe entrance, lift the pipe up and block the entrance hole with the sponge..
4,00 €
Apidea Mating Box
This cubic-formed hive, made of brown hard Styrofoam, provides perfect conditions for a warm environment including a good stacking system. This hive is easily transportable and simple to clean. - 3 frame brood box (or 5 frame with feeder removed) - Supplied with 3 plastic frames - Removable sliding floor...
35,00 €
Feeder Frame
Feeder frame for use in Multi-Breeding Nuc.
12,00 €
Grafting Tool - Swiss Style
Swiss style grafting tool. Choose either green or yellow from menu.
10,00 €
Queen Mandibular Pheremone
Uses of Queen Mandibular Pheromone 1. Temporary replacement of the queen. When a queen dies and no other queen is available immediately or the queen is failing, QMP can be used to keep the colony queenright for up to 3 weeks. Remove the queen and all queen cells and insert one QMP. Once a replacement...
20,00 €
FIELD EVALUATION JOURNAL
FIELD EVALUATION JOURNAL WITH WATERPROOF PAGES
20,00 €
Mating Box Frame
Plastic frame for white poly mating box. Pack of 5. Queen mating nucs are small bee hives from which a queen emerges from her cell, goes on her mating flight, and returns to lay her eggs. The smaller hive makes it easier to find (or "catch") the queen and move her to another hive or prepare her for ...
6,00 €
Cell Cup - Brown - Pack 100
Brown cell cups for use with cup kit. Sold in packs of 100.
10,00 €
Apidea Roof
Lid to fit Apidea mating hives. The Apidea mating hives themselves are well designed, robust and thought through pieces of equipment . Queens that emerge in them appear to get mated quickly and they use only a small amount of apiary resources. Basically, a cup full of bees, a piece of fondant and a little...
10,00 €
Queen Rearing Cage
0,50 €
Crown Of Thorns Marking Cage
Original style crown of thorns queen marking cage. While the queen is on the comb, you should lower the cage over the queen. The worker bees will escape from the spikes but the queen will remain. Using a queen marking pen or numbering kit - you should put a dot on the back of her thorax .
4,50 €
Queen Collection Set
- Practical and ready to use without the need for handmade structures to reduce brood area/ - An ideal environment for queen confinement as slots will allow a safe passage of bees. .
25,00 €
Plastic Mating Box
This Plastic Mating Box provides strength and robustness for peace of mind when needing to be moved. The material also leaves the Mating Box very easy to clean. Queen mating nucs are small bee hives from which a queen emerges from her cell, goes on her mating flight, and returns to lay her eggs . The...
50,00 €
Multi-Breeding Nuc Twin Frame Pack of 10
Twin frames for use in multi-breeding nuc. Supplied in packs of 10 (10 half frames or together, 5 nuc frames) SUPPLIED UNASSEMBLED FLAT PACK
40,00 €
Apidea Built In Feeder
Replacement built-in feeder for Apidea mating hive.
6,00 €
Queen Introduction Cage
3,50 €
Apidea Top Feeder
With the new feeder for the APIDEA mating hive you can hold syrup for your mating bees. This way you can keep your queen bees for longer in your mating hive. The Apidea mating hives themselves are well designed, robust and thought through pieces of equipment . Queens that emerge in them appear to get...
20,00 €
Cell Protector - Pack Of Ten
Cell protectors are used to protect queen cells installed by a beekeeper when making nucs or splits . Bees sometimes will damage queen cells, in particular if the nuc or split has just been made and the colony is not ready for a new queen cell just yet.
4,00 €
Swarm Catcher
Made from canvas and plated steel with nylon rope pull cord for closing the top. Place the bag underneath the swarm and gently ease the bag upward to enclose as much of the swarm as possible. Pull the cord and shake gently.
25,01 €
Apidea Breeding Chamber
Super box for Apidea mating hive Takes 5 frames (sold separately) Frames available HERE Irish Bee Supplies are direct importers & distributors for APIDEA Vertriebs AG
20,00 €
Grafting Tool - Stainless Steel
This finely crafted, stainless steel grafting tool is engineered to improve the grafting experience with two unique ends that are sure to benefit in the egg removal procedure.
7,01 €